order wire
英 [ˈɔːdə(r) ˈwaɪə(r)]
美 [ˈɔːrdər ˈwaɪər]
传号线；挂号线；联络线；指挥线路; 缩写词OW
双语例句
- The shape, finish and the hardness of materials must be improved in order to reduce the friction because of the wire sliding in the surface of the ceramic rings.
工作时，丝线在瓷眼表面滑动，为了降低摩擦力，必须提高材料的硬度，光洁度及形状。 - In order to convenient the user, we gave the entire wire drive feeder's accident type and the resolve method in the article's end.
为方便用户使用，最后给出了整套送丝机构的故障类型及维修方法。 - HTTPS ( specifically SSL 3.0) is used for all publisher API calls in order to assure wire privacy.
为了保证通讯的私密性，发布API必须使用HTTPS（特别的，SSL3.0）。 - In order to clarify the effects of ultrasonic vibration on wire drawing process, an experimental research of copper wire drawing with utilization of ultrasonic vibration was conducted.
为了搞清超声波在拔丝加工中产生降载效应的机理，在自制的超声波拔丝装置上对黄铜丝进行了一系列冷拔加工的实验。 - In order to detect the carbide network in high carbon hypereutectoid steel wire rods accurately, two kinds of detection method of the carbide network are compared.
为了准确地检验高碳过共析钢盘条中的网状渗碳体，分别对选用硝酸酒精溶液侵蚀和碱性苦味酸钠水溶液热侵蚀两种显示方法进行了比较。 - Note: if client has any special requirement to the wire disc, we will follow customers order to select the wire disc.
注：如客户对线盘有特殊要求的，一般应按客户要求选取线盘。 - Application: Be utilized to separate rubber and steel wire of bead in order to get whole steel wire.
设备用途：该机主要用于将各种轮胎的钢口圈上的橡胶与钢丝圈分离，从而得到一个完整的钢丝圈。 - The DS bundle needs to be installed and started in order to wire up components.
DSbundle需要安装并启动，以把组件连接起来。 - In order to adapt high increase of company business and satisfy vast wire and cable friends demand of online communication and communion, shangha.
为了适应公司业务的高速增长，为了满足广大线缆行业朋友日益增长的网络在线沟通和交流的要求，上海斯。 - In the paper, we calculate actual encircle curve based on accurate flat cam theoretic contour curve equations and analyze in Cartesian coordinate and polar coordinate in order to obtain the molybdenum screw center tracks of control wire cutting machine.
以精密平板凸轮理论轮廓曲线方程计算实际包络曲线，采用直角坐标解析式和极坐标分析，进而确定数控线切割机床钼丝中心的轨迹。 - In order to calculate wire cutting program data, the curve fitting is done before the involute profile of die or gear is processed by WEDM.
电火花线切割加工模具或齿轮渐开线齿廓之前，需先作曲线拟合，以便计算线切割编程数据。 - In order to decrease wire breakage during cold drawing the morphology of inclusions in steel have to be controlled besides strict control of the chemical compositions and cleanliness of the liquid steel.
为了减少轮胎钢丝在冷拔时的断头，除要求控制钢的成分和纯度外，还要求控制钢中夹杂物的形态。 - In order to resolve the problem of the fine wire's diameter measurement, according to the optical Fourier transformation theory, proposes a measurement method that the gather beam is used for direct measurement beam and discusses the parameter design of the measurement system.
为了解决微小直径细丝的直径测量问题，在光学傅里叶变换理论的基础上，提出了以会聚光束作为直接测量光束的测量方法，并对测量系统的参数设计进行了讨论。 - It reasonably determines the interconnecting set of wire, assigns wires to layers, defines the order of wire layout, and uses feedthrough holes and obstacle walls so that it can increase the routing efficiency and save the computer time.
它采用李氏算法，吸收了人工布线的经验，合理地进行分线、分层、定顺序、使用借孔及障碍墙等，以提高布线的效率。 - In order to measure the length of steel wire rope precisely, the velocity ratio of pressing wheel and driving windlass is adopted for detecting wheel spin and the accumulated pulse error is also adopted to eliminate the round off error.
为了准确测量钢丝绳的长度，提出了采用比较压紧轮和驱动卷筒的转速比的方法来检测是否打滑，并在程序中采用累积脉冲误差的方法来消除由于微小打滑而出现的舍入误差。 - In order to solve the problem, a new bolting with wire mesh and cable support scheme was used to optimize the supporting parameters and procedure.
为解决这一问题，采用新型的锚网索支护方案对支护参数和支护过程进行优化。 - In order to improve the dynamic property, steel wire rope vibration absorber with hysteretic nonlinearity in second system hanging is introduced.
为改善电力机车受电弓的动力特性，降低振动，减少弓-网间离线率，弓头悬挂采用具有滞后非线性特性的钢丝绳减振器，在实际应用中取得了良好的减振效果。 - In order to solve the modeling problem of wire rope in the analysis of the dynamic characteristics, kinetic tension character is discussed under multiple acceleration curves and reasonable way to modeling is provided.
为解决起重机动态分析中钢丝绳的建模问题，研究采用多种加速度时钢丝绳的动张力特性，提出了合理的建模方法。 - In order to minimize interconnecting wire, tactile sensing array is made up of a sheet of piezoresistive rubber and common column and row stripe electrodes.
压阻阵列触觉传感器为减少外接引线，一般来用行列电极结构，给触觉的扫描采样带来了噪声。 - In order to reduce the quantity of wire and raise reliability and stability of the device, I/ O interface and programmable function of CPLD are used to implement the function of various logic devices by compiling software of CPLD.
同时利用CPLD丰富的I/O口及灵活的可编程性，通过软件编程实现各种逻辑器件的功能，从而减少了外部连接线的数量，提高了系统的可靠性和稳定性。 - In order to help the strategic management of the charged barbed wire net management business enterprise, promote the company develop quickly, continued and steady.
以帮助电网经营企业规划财务战略管理，促进公司快速持续稳健发展。 - In order to avoid accidents caused by failure of wire ropes, it is essential to improve examination methods for mechanical properties besides controlling the design and manufacture of wire ropes.
要防止因为钢丝绳的失效造成的安全事故，除了控制钢丝绳的设计和制造质量外，做好钢丝绳机械性能的栓验工作也是极为重要的。 - Finally, Torque Limiter and wire rope were designed in order to make the winch have overload protection and wire rope arrangement functions.
最后，通过对扭力限制器和压绳辊的设计，使绞盘机具有过载保护和排绳功能。 - In order to improve the contact state between pantograph and wire, current scientific research institutions are generally improved contact line and pantograph, the former mainly make conductor material better, and the latter use double Double slippers pantograph and modified slippers materials.
为了改善弓网接触状态，目前科研机构一般是在接触网和受电弓两方面作出改进，前者主要是改变接触导体材料，后者主要是选用双滑板受电弓及改进滑板材料。 - Along with social development, business to wire stainless steel demand has risen sharply, but the direct used was mostly the special-shaped stainless steel wire. So it is need to make deep processing in order to obtain the required specifications of various special-shaped stainless steel wire.
随着社会发展，企业对不锈钢线材的需求量急剧增加，由于能直接使用的大都是不锈钢异型线材，为此要对不锈钢线材进行深加工，以得到所需规格的各种异型线材。